3,300 Volts – 2500mm x 800mm – THXF Reflective Roll Up DCB Banner / Distribution Control Board Safety Sign

3,300 Volts – 2500mm x 800mm – THXF Reflective Roll Up DCB Banner / Distribution Control Board Safety Sign

The 3,300 Volts THXF Reflective Roll Up DCB Banner is a high-visibility electrical safety and identification system designed for Distribution Control Board locations, high-voltage electrical installations, substations, mining operations and underground infrastructure environments.

Measuring 2500mm x 800mm, the banner provides a large reflective warning surface for clearly identifying 3,300 Volt electrical areas while also supporting permit display, isolation documentation and operational safety communication at the point of work.

Manufactured using Class 1W retroreflective Omni roll-up material on heavy-duty 440 gsm waterproof vinyl, the banner delivers strong visibility in underground, low-light and dust-prone environments. Reinforced fuse-welded construction, double-sided reflective printing, clear welded A3 document pockets and reinforced eyelets provide a durable, portable and reusable solution for demanding electrical and mining applications.

Main Advantage

The main advantage of the 3,300 Volt DCB Banner is the combination of high-voltage hazard identification and document management within one highly visible safety system.

Integrated clear A3 document pockets allow permits, isolation records, operating procedures and other electrical safety documentation to be displayed directly at the Distribution Control Board or work area, helping improve communication, site organisation and access to critical information.

Distribution Control Board Identification

The THXF Reflective Roll Up DCB Banner is designed to provide a large and clearly visible identification point around Distribution Control Boards and other high-voltage electrical infrastructure.

The 3,300 Volt message helps identify the electrical hazard level associated with the area, while the reflective surface improves recognition under cap lamps, vehicle headlights and artificial lighting systems commonly used in underground and industrial environments.

The large 2500mm x 800mm format provides a prominent safety presence around electrical installations, switchboards, transformers and controlled work zones.

Integrated A3 Document Pockets

Clear welded A3 document pockets are integrated directly into the DCB Banner to support the display of critical electrical and operational documentation.

Typical documents may include:

• Electrical permits
• Isolation records
• Operating procedures
• Maintenance documentation
• Shutdown information
• Safety instructions
• Site-specific electrical documentation

Locating these documents directly at the point of work helps crews access relevant information quickly while supporting consistent document control around high-voltage electrical installations.

Product Configuration & Inclusions

• 1 x 2500mm x 800mm THXF Reflective Roll Up DCB Banner
• 3,300 Volt high-voltage identification
• Class 1W retroreflective Omni roll-up material
• Heavy-duty 440 gsm waterproof vinyl
• Double-sided reflective printing
• Clear welded A3 document pockets
• Reinforced eyelets top and bottom
• Heavy-duty fuse-welded construction

Features & Benefits

• 2500mm x 800mm large-format banner
• 3,300 Volt high-voltage electrical identification
• Class 1W retroreflective construction
• Heavy-duty 440 gsm waterproof vinyl
• Double-sided reflective display
• Clear welded A3 document pockets
• High visibility during day, night and low-light operations
• Suitable for underground environments
• Weather-resistant construction
• Reinforced eyelets top and bottom
• Heavy-duty fuse-welded construction
• Compact roll-up storage
• Rapid deployment and pack-down
• Reusable design
• Australian made

Suitable Industries & Applications

The 3,300 Volt THXF Reflective Roll Up DCB Banner is suitable for mining operations, underground mines, tunnelling projects, industrial processing facilities, electrical contractors, utilities and electrical distribution networks.

Common applications include:

• Distribution Control Board identification
• High-voltage electrical zone marking
• Electrical permit display
• Isolation record management
• Switchboard identification
• Transformer locations
• Maintenance shutdowns
• Electrical safety communication
• Underground installations
• Controlled access work zones

Class 1W Retroreflective Omni Material

The banner is manufactured using Class 1W retroreflective Omni roll-up material to provide a highly visible warning and identification surface across demanding electrical and industrial environments.

The reflective construction improves recognition under cap lamps, vehicle headlights and artificial lighting systems, making the banner particularly suitable for underground mines, tunnels, low-light infrastructure areas and electrical work zones.

Double-sided reflective printing allows the high-voltage identification to remain visible from multiple approach directions depending on the installation arrangement.

Heavy-Duty 440 gsm Waterproof Vinyl

The Class 1W reflective face is supported by heavy-duty 440 gsm waterproof vinyl designed for demanding underground, mining, tunnelling and industrial applications.

Fuse-welded construction reinforces the banner and helps provide durability during repeated installation, removal, transport and storage.

The flexible construction allows the 2500mm x 800mm banner to be rolled into a more compact format when not in use, reducing storage requirements compared with equivalent rigid safety signage.

Designed for Underground Mining & Tunnelling

Underground electrical environments require safety identification that remains highly visible despite reduced ambient lighting, dust, machinery movement and complex infrastructure.

The reflective DCB Banner provides a large visual identification point around Distribution Control Boards and electrical installations while allowing important permits and isolation documentation to be displayed in the same location.

This combined warning and document-control format is particularly practical for mining and tunnelling operations where crews need to quickly identify high-voltage equipment and access relevant electrical safety information.

Electrical Safety & Identification

The 3,300 Volt DCB Banner provides a dedicated location for high-voltage identification and electrical safety communication around Distribution Control Boards and associated installations.

Site-specific artwork, voltage identification, document configuration and installation should be selected according to the electrical system, project requirements and applicable site safety procedures.

Compliance / Material / Colour Coding Options

Manufactured using Class 1W retroreflective Omni roll-up material on 440 gsm waterproof vinyl for mining, tunnelling, industrial facilities and electrical infrastructure projects.

The banner can be configured to support site electrical identification and safety communication requirements, including applications associated with AS 1319 Safety Signs for the Occupational Environment, AS/NZS 1906.1 retroreflective materials and applicable electrical safety requirements.

Suitability for a particular compliance requirement should be assessed according to the final artwork, voltage rating, installation method, site procedures and project requirements.

Why Organisations Choose Reflective DCB Banners

• Combines electrical hazard identification and document management
• Large 2500mm x 800mm warning surface
• High visibility in underground and low-light environments
• Integrated A3 document display
• Supports permit and isolation record management
• Double-sided reflective display
• Heavy-duty waterproof construction
• Portable roll-up format
• Compact storage compared with rigid signage
• Suitable for demanding mining and industrial environments
• Australian made

Custom Options

• Custom voltage ratings
• Custom sizes
• Custom branding and identification
• Site-specific numbering systems
• Additional document pockets
• Project-specific configurations
• Alternative reflective finishes
• Bulk order options

Optional Accessories

• Electrical isolation signage
• Reflective document holders
• Cable identification systems
• Distribution Control Board signage

Technical Specifications

• Product Type: THXF Reflective Roll Up Distribution Control Board Safety Banner
• Voltage Identification: 3,300 Volts
• Banner Size: 2500mm x 800mm
• Reflective Material: Class 1W retroreflective Omni roll-up material
• Backing Material: Heavy-duty 440 gsm waterproof vinyl
• Printing: Double-sided reflective display
• Document Storage: Clear welded A3 document pockets
• Mounting Points: Reinforced eyelets top and bottom
• Construction: Heavy-duty fuse-welded
• Storage: Compact roll-up configuration
• Primary Applications: DCB identification, high-voltage electrical safety, permit display and isolation record management
• Suitable Environments: Mining, underground, tunnelling, industrial and electrical infrastructure
• Manufacturing Origin: Australia

Frequently Asked Questions

What is a 3,300 Volt THXF Reflective Roll Up DCB Banner?

It is a large-format reflective electrical safety banner designed to identify 3,300 Volt Distribution Control Board locations and provide a dedicated display area for permits, isolation records and other electrical safety documentation.

What size is the banner?

This product configuration measures 2500mm x 800mm.

What voltage does this DCB Banner identify?

This configuration is designed for 3,300 Volt high-voltage electrical identification.

Is the DCB Banner reflective?

Yes. It is manufactured using Class 1W retroreflective Omni roll-up material and features double-sided reflective printing.

What are the A3 pockets used for?

The clear welded A3 pockets are designed to display electrical permits, isolation records, procedures, maintenance documentation and other site-specific safety information directly at the Distribution Control Board or work area.

Is the banner suitable for underground mining?

Yes. The reflective construction and heavy-duty waterproof vinyl make the banner suitable for underground mines, tunnelling projects and other low-light industrial environments.

Can custom voltage ratings be produced?

Yes. Custom voltage ratings and project-specific electrical identification can be produced to suit site requirements.

Can the banner size be customised?

Yes. Custom sizes and project-specific configurations are available.

Can additional document pockets be added?

Yes. Additional document pockets can be incorporated into custom project configurations.

Is the 3,300 Volt DCB Banner Australian made?

Yes. Global Safety Industries manufactures the THXF Reflective Roll Up DCB Banner in Australia.

Request a Quote

Custom voltage ratings, site identification, document pocket configurations, project-specific layouts and bulk supply options are available.

Call 1300 133 447 or email [email protected] to discuss your Distribution Control Board, high-voltage identification, underground electrical safety or project requirements.

We guarantee to beat any competitor price by 5% on Australian made quality.