Reflective Delineation Sleeves – JSA Required – CL400 Class 1W | Australian Made

Reflective Delineation Sleeves – JSA Required – CL400 Class 1W | Australian Made

Global Safety Industries JSA Required Reflective Delineation Sleeves are Australian Made, double-sided reflective sleeves designed to combine high-visibility post and bollard delineation with a clear JSA Required identification message. Manufactured from CL400 Class 1W retroreflective material, the sleeves provide a large reflective identification surface for compatible posts, bollards and guide markers used around designated work areas, access points and operational locations where a Job Safety Analysis (JSA) requirement forms part of established site procedures.

Each sleeve combines a CL400 Class 1W reflective outer with a reinforced PVC vinyl liner and fuse-welded construction for strength, flexibility and repeated outdoor use. The JSA Required message is digitally printed onto the reflective sleeve, allowing site-specific safety procedure identification and reflective delineation to be incorporated into the same flexible product.

Available in five standard sizes, the JSA Required Reflective Delineation Sleeve range can be configured for different post, guide marker and bollard applications. The two-sided message and reflective construction make the sleeve suitable for mining, quarrying, construction, civil and industrial environments where personnel need a prominent visual reminder that a JSA is required as part of the site's established work or access procedure.

Main Advantage

The JSA Required Reflective Delineation Sleeve combines a prominent site safety reminder with reflective post delineation within one product. Instead of relying on a plain post with a small reflective patch or separate identification label, the sleeve creates an extended reflective surface while displaying the JSA Required message directly on the compatible post or bollard.

JSA Required Identification

The JSA Required configuration is designed for locations where personnel need to be reminded that a Job Safety Analysis is required before undertaking work, entering a designated area or proceeding with an activity in accordance with site-specific procedures. The printed message provides a prominent identification point while the surrounding reflective surface increases the visibility of the delineated location.

This makes the sleeve suitable for mines, quarries, construction projects, civil works and industrial facilities where JSA requirements form part of an established safety-management, work-planning, permit or access procedure.

Available JSA Required Reflective Sleeve Sizes

• 125 × 750mm – designed for Steel Flex and Star Picket Guide Posts
• 140 × 500mm – suited to Semi-Rigid and PVC Plastic Guide Posts
• 140 × 1000mm – provides extended reflective coverage for increased post visibility
• 200 × 750mm – suited to PU Poly Guide Posts, bollards and larger supports
• 200 × 1000mm – extended coverage for PU Poly Guide Posts, T Top Bollards and larger post applications
• Custom sizes can be manufactured for project-specific requirements

Material & Construction

The reflective outer surface is manufactured from CL400 Class 1W retroreflective material and supported by a reinforced PVC vinyl liner. Fuse-welded construction creates a flexible sleeve designed for demanding mining, construction, civil and industrial applications and repeated outdoor use.

The flexible construction allows the sleeve to fit over compatible posts and bollards rather than relying on exposed adhesive reflective tape. This creates a larger reflective area while also providing space for the printed JSA Required identification message.

Printed Reflective JSA Required Message

The JSA Required message is digitally printed onto the reflective sleeve, combining a site-specific safety procedure reminder with reflective visibility within one product configuration.

The double-sided configuration allows the JSA Required message and reflective surface to be presented from opposing viewing directions, making the sleeve useful where personnel, vehicles or mobile equipment may approach the designated work area or access point from different directions.

Features & Benefits

• CL400 Class 1W retroreflective material
• JSA Required identification message
• Full-colour digital printing
• Double-sided reflective and printed configuration
• Extended reflective surface for post and bollard visibility
• Suitable for site-specific JSA and work-procedure identification
• Reinforced PVC vinyl liner for additional support and durability
• Fuse-welded flexible sleeve construction
• Fits over compatible posts, bollards and guide markers
• Five standard sleeve sizes available
• Custom sizes available for project-specific applications
• Combines reflective delineation with a site-specific safety procedure reminder
• Australian Made by Global Safety Industries

Suitable Industries & Applications

JSA Required Reflective Delineation Sleeves are suitable for mining, quarrying, construction, civil and heavy industrial environments where compatible posts or bollards require increased visibility together with a clear reminder of site-specific JSA requirements.

Common applications include controlled work areas, mine and quarry operational zones, construction sites, maintenance areas, contractor access points, designated work locations, restricted operational areas, bollard identification and locations where completion of a JSA forms part of established site procedures.

CL400 Class 1W Reflective Material

The sleeve is manufactured from CL400 Class 1W retroreflective material to provide an extended reflective surface along the compatible post, bollard or guide marker. The larger reflective area helps the JSA Required identification point remain visually prominent where increased visibility is required.

Retroreflective material returns incident light towards its source, helping the sleeve and printed JSA Required message become more visible when illuminated by vehicle headlights, mobile equipment lighting or other directed lighting during low-light and nighttime operations.

Five Sizes for Different Post & Bollard Applications

The JSA Required Reflective Delineation Sleeve range provides five standard configurations for different support types. The 125 × 750mm sleeve is designed for Steel Flex and Star Picket Guide Posts, while the 140mm-wide configurations suit Semi-Rigid and PVC Plastic Guide Posts.

The wider 200mm configurations are suited to PU Poly Guide Posts, bollards and larger supports. The 1000mm-long configurations provide extended reflective coverage where a larger JSA Required identification surface is required.

Technical Specifications

• Product: JSA Required Reflective Delineation Sleeve
• Message: JSA Required
• Reflective Material: CL400 Class 1W retroreflective material
• Visibility: Double-sided reflective construction
• Printing: Full-colour digital printing
• Message Configuration: Two-sided
• Liner: Reinforced PVC vinyl liner
• Construction: Fuse-welded flexible sleeve
• Standard Sizes: 125 × 750mm, 140 × 500mm, 140 × 1000mm, 200 × 750mm and 200 × 1000mm
• Custom Sizes: Available for project-specific requirements
• Compatible Applications: Steel Flex Guide Posts, Star Picket Guide Posts, Semi-Rigid Guide Posts, PVC Plastic Guide Posts, PU Poly Guide Posts, T Top Bollards and compatible larger supports
• Applications: JSA requirement identification, controlled work-area identification, reflective delineation, bollard identification and worksite demarcation
• Manufacturing Origin: Australian Made

Site & Public-Road Applications

A JSA Required sleeve is an identification and delineation product and should not automatically be treated as a substitute for a completed Job Safety Analysis, risk assessment, permit, mandatory safety signage, access controls, barriers or other controls required under a site's safety-management system. The circumstances in which a JSA is required and the process for completing, reviewing and authorising it are site-specific and should be established by the responsible site operator. Where the sleeve forms part of a regulated mining, industrial, construction or public-road environment, confirm the required procedures, signage, placement and project specification with the responsible site operator, safety professional or relevant authority before use.

Frequently Asked Questions

What is a JSA Required Reflective Delineation Sleeve?

It is a flexible, double-sided reflective sleeve designed to fit over compatible posts, bollards and guide markers while displaying a JSA Required message and providing increased reflective visibility.

What reflective material is used?

The sleeve is manufactured using CL400 Class 1W retroreflective material combined with a reinforced PVC vinyl liner and fuse-welded construction.

What sizes are available?

Five standard sizes are available: 125 × 750mm, 140 × 500mm, 140 × 1000mm, 200 × 750mm and 200 × 1000mm. Custom sizes can also be manufactured for project-specific requirements.

Is the JSA Required message printed on both sides?

Yes. The printed configuration supports a two-sided JSA Required message together with double-sided reflective visibility.

Which posts and bollards can the sleeves be used with?

The range includes sizes designed for Steel Flex and Star Picket Guide Posts, Semi-Rigid and PVC Plastic Guide Posts, PU Poly Guide Posts, T Top Bollards and other compatible post or bollard applications.

Where can JSA Required Reflective Delineation Sleeves be used?

Typical applications include mines, quarries, construction sites, civil works, maintenance areas and industrial facilities where a JSA requirement forms part of an established site-specific work, access or safety procedure.

Does a JSA Required sleeve replace a Job Safety Analysis or other required safety procedures?

No. The sleeve provides a visible reminder and reflective delineation of a location where a JSA requirement applies. It does not replace completing the required JSA, risk assessment, permit, authorisation or any other safety procedure established by the site.

Are JSA Required Reflective Delineation Sleeves Australian Made?

Yes. Global Safety Industries manufactures the Reflective Delineation Sleeve range in Australia.

Request a Quote

Call 1300 133 447 or email [email protected] to discuss sleeve sizes, printed messages, custom configurations, project requirements or bulk order pricing.

We guarantee to beat any competitor price by 5% on Australian made quality.